Sexual Orientation, Gender Identity and The Social...

Although we live in modern times, stigmas regarding gender identity cease to exist. These biases are prevalent within various cultures. Male and female adolescents are stifled from expressing themselves based on how they personally relate to their own femininity or masculinity and sex roles. The cause of this constriction of emotions is due in large part to these young people being coerced into obeying the rules of society. In addition, societal constructions seem to totally disregard the physiological and biological aspects of adolescent puberty. We acquire sexual orientation and gender identity during adolescence due to puberty, culture and our surrounding environment. For instance, puberty takes place over several years†¦show more content†¦(Money, 1976, p. 197) Another instance is, during adolescence the brain is not yet fully developed, yet goes through changes which affect behavior and the decision-making processes. However, certain characteristics are innate due to h eredity. The biological make-up of both mother and father is passed along to their offspring due to the genetic system comprised of an arrangement of genes and DNA. In a book titled, â€Å"Behaviorism†, John B. Watson explains, â€Å"Many of the most important features of development and of individuality result from the way the genes are disposed in the cells, their actual physical arrangement and consequent behavior†. (2008, p. 52). Adolescence is a time when young adults venture out and experiment to quell their curiosities. Finding a sense of self and fitting in is of the upmost importance. This is the age when peer- pressure falls into place. Legal and illegal substances are being sampled, sexual identity is being discovered and the choices which are made may not be too pleasing to the parents of individuals. (Meschke, Bartholomae, Zentall, 2000, p. 147). For example, children are being rejected and not accepted for who they really are. (Dreger, 2009, p. 27). â€Å"Differences between boys and girls increase with age and are the result of increased socialization pressures to conform to traditional masculine and feminine sex roles.† (Galambos et al.Show MoreRelatedAge Groups And The Lifecycle1432 Words   |  6 PagesChildren (Ages 3-12). Gender labels are placed on children prior to and after birth as we are taught about gender binary in an â€Å"either/or† fashion (Janssen Erickson-Schroth, 2013) during early years of development. For example, the newborn is either a boy or a girl and this predisposes children to gender specific ideologies. Gender revealing parties and baby showers are notorious for continuing traditional societal viewpoints of binary assumptions – girl or boy. Gender roles are established atRead MoreSexual Sexuality And Its Effects On Society1443 Words   |  6 Pagesrapid commencement of paired sexual practices during the latter years or adolescence. Sex is much more than it used to be. Sexual desire is now considered central to human identity, and sexual self-expression is seen by many to be essential for heathy personhood. The media, public schools and medical professional often teach that healthy adults, or even adolescents, should explore their desires and express them. At th e same time, sex is much less than it used to be. Sexual acts are often consideredRead MoreCommunication Between African American Mothers and Their Daughters1740 Words   |  7 Pagesthe restrained prospects for African American males. As a result, girls observed the dual identity of their mothers and other prominent women in the society and internalized these identities (Lee Ashcraft, 2005). Despite so many challenges and stressors during parenting, African American mothers play a significant role in development of perceived self-identity and goal oriented behaviors among their adolescent daughters. Mother-Daughter Relationship According to Bynum Kotchick (2006), scholarsRead MoreThe Issue Of Adolescent Homosexuality2435 Words   |  10 Pagesteenagers to be who they truly are because of the risk of being ostracized and isolated by their peers. There are certain pressures and prejudices imposed by a predominately heterosexual society on homosexuals, and especially on homosexual teens, that can cause teenagers to suppress their preferences. These stereotypes can influence if a teen is willing to openly reveal their sexual identity and because society has become so absent- minded to the mannerisms commonly used to describe homosexuals such as queerRead MoreGay Teens: Accepting the Unaccepted1199 Words   |  5 PagesGrowing up is a complex and puzzling task for every teenager or adolescent. One important feature is creating ones sexual identity. All teenagers explore and experiment sexually as part of normal development. These sexual experiments may be with members of the same or opposite sex. For man y teenagers, thinking about or experimenting with the same sex may cause nervousness and concerns regarding their sexual orientation. Most teenagers have been brought up to think that homosexuality is wrongRead MoreAdolescent Stages of Development1500 Words   |  6 PagesAdolescent Stages of Development Adolescence is probably the most difficult period in life of every individual since it is a transitional stage between childhood and adulthood. In this period adolescents undergo significant changes in physiological, psychological and social aspects. Naturally, these changes produce a significant impact on their lifestyle, behaviour, psychology, etc. Traditionally, adolescence is considered to start at preteens, mostly from around 9-10 years of age till 19-20 yearsRead MoreSocial Roles And Identity1367 Words   |  6 PagesSocial roles and identities impact our everyday lives in means that often go undetected. Perhaps experiencing social identities has become mundane because of the commonality and predictability of most situations; we are used to experiencing roles in the ways that they are most often presented to us. However, varying environments may produce or favor certain behaviors and identifications over others. Middle school, for example, is a transformative time for many adolescents as they begin to form interestsRead MoreSociological causes of Homosexuality4486 Words   |  18 Pages â€Å"THE SOCIOLOGICAL CAUSES OF HOMOSEXUALITY Department of Social Sciences College of Arts and Sciences University of the Philippines, Los Baà ±os Los Baà ±os, Laguna October 2012 INTRODUCTION The existence of gender classification determines our sexual segmentation. They are classified as either males or females. These gender classifications are also used as bases of physical work capacities, clothing preferences, decisions for priority and the like. More often than not, these segmentationsRead MoreGender Identity Disorder2712 Words   |  11 PagesGender Identity Disorder What is gender identity disorder? Gender identity disorder (GID) is the formal diagnosis used by psychologists and physicians to describe persons who experience significant gender dysphoria (discontent with the biological sex they were born with). It is a psychiatric classification and describes the attributes related to transsexuality. Gender identity disorder in children is usually reported as having always been there since childhood, and is considered clinicallyRead MoreGender Socialization And Social Control1508 Words   |  7 Pagesand large, gender socialization is a major contributor to identity and self- concept. Gender therefore becomes a characteristic that defines other’s perceptions and evaluations of us. People come to manage gender along with aspects of other aspects of the self by making sure that we are acting in gender-appropriate way (Goffman, 1959, Libby). In itself, the self is a product of social forces and it emerges through socialization. Being that gender is a major function of one’s identity, stereotypes

Successful Public Relations Campaigns Free Essays

Successful public relations campaigns no longer have to stop at billboards, store greeters and newspapers. In this age of social networking, media and technology, there are numerous opportunities to explore various methods of implementing effective public relations campaigns and a variety of companies have been capitalizing on these different methods. Following, you will see examples of employing the Internet, nature and a host of other methods in order to catch the eye and attention of consumers. We will write a custom essay sample on Successful Public Relations Campaigns or any similar topic only for you Order Now In this day, the options are so vast that marketing, advertising and PR professionals have their work cut out for them. In February 2011, Rayovac initiated a Rapid-Response Twitter campaign to engage consumers who likely had spare time on their hands due to the snowstorm that a big part of the country was experiencing. The campaign was essentially a virtual snowball fight that included consumer changing their profile picture to a Rayovac-branded avatar and each related tweet utilized the hashtag #snowball. The virtual snowball fight lasted for roughly 48 hours and thereafter Rayovac hosted a two hour snow day tweet-up where Rayovac followers could tweet about the weather in their area, activities they partook in and weather related trivia complete with prizes. This particular campaign was seemingly successful, generating 1188 click-throughs to retrieve the branded avatar, becoming a worldwide trending topic (#TT) and a 30% increase in Twitter followers. With the popularity of Twitter, this was a genius marketing/public relations plan. It gave consumers something to do while home on their snow days and one could assume that some participants were introduced and others may have become more familiar with the brand Rayovac. There’s not much that I would have done differently. I think that the only component that was missing was something to target the non-Twitter users. Since this was solely an online public relations effort, this same campaign could have been tweaked a bit to have also been done on Facebook, Google Plus or another site for those who do not use Twitter. Converse has taken one of their current PR stunts to the streets of Australia. Strategically placed in all of Australia’s major cities such as Sydney, Melbourne and Perth are fire emergency type boxes that contain a pair of sneakers behind a glass window. The slogan of the campaign is, â€Å"Let’s Take This Outside† and written across the top of each fire box is, â€Å"IN CASE OF EMERGENCY, BREAK GLASS. † Upon breaking the glass, one can actually retrieve a pair of free, brand new, Converse tennis shoes. The sneakers being spotlighted are from the 2012 Chuck Taylor All Star collection. This feat has been constructed to bring awareness to the brand as well as fully engage the citizens of Australia via a few different means. There are clues on the company’s website as well as their Facebook page in a picture album leading consumers to the locations of these fire boxes. Converse has similar PR stunts going on in other countries as well. This campaign fully encompasses every facet of consumerism. From the scavenger hunt-type clues to encouraging giving to one another if they find shoes that are the wrong size to capitalizing on the public’s love of free goods, this is a fun, genius public relations task that will run through June 10, 2012. I can’t think of a single thing that could be done differently. Converse utilized every form of media. No stone was left unturned. Print media, online social networks, in-store advertisements and television commercials were all incorporated. Even the â€Å"prizes† themselves are outside and available to those who are off the grid. There is no discriminating demographic either, because the target audience is anyone who wears sneakers. This was well planned, very well executed and done in such a way that is preventing mass hysteria. I think that would be the only apprehension that I would have as a company is public reaction since everyone would be interested in a free pair of sneakers. I’m certain there were many precautions that had to be taken in order for this to come to fruition. Zoning, permits, and backing from law enforcement departments had to be among the kinks that needed to be worked out, but they dealt with them in a way that is seemingly flawless. Converse has managed to concoct the perfect formula to keep the campaign enjoyable and safe. How to cite Successful Public Relations Campaigns, Essay examples

Cutting Tools free essay sample

To produce quality parts a cutting tool must possess following typical characteristics: -Hardness hardness and strength at high temperatures, to resist flank wear and deformation -Toughness to resist bulk breakage, so that tools don’t chip or fracture -Wear resistance having acceptable tool life before needing to be replaced †¢Non-reactive with the work piece material †¢Chemical stability to resist oxidation and diffusion †¢Resistance to sudden thermal changes. Cutting tool materials can be divided into two main categories: stable and unstable. Unstable materials are â€Å"substances that start at a relatively low hardness point and are then heat treated to promote the growth of hard particles inside the original matrix, which increases the overall hardness of the material at the expense of some its original toughness. Since heat is the mechanism to alter the structure of the substance, and at the same time the cutting action produces a lot of heat, such substances are inherently unstable under machining conditions†. Stable materials on the other hand are â€Å"substances that remain relatively stable under the heat produced by most machining conditions, as they dont attain their hardness through heat. They wear down due to abrasion, but generally dont change their properties much during use† . Most stable materials tend to be hard and very fragile and are generally used for large, heavy and stiff machinery. Unstable materials tend to be softer and thus tougher and are generally used in hand tools and light machinery. The main materials used for cutting tools are: -Carbon Steel -High Speed Steel (HSS) -HSS Cobalt Cast Alloys -Cast Cobalt Alloy -Cemented Carbide -Coated Carbide -Ceramic -Cermet -Cubic Boron Nitride (CBN) -Diamond Carbon Steel This material is one of the earliest cutting materials used in machining. It is however now virtually superseded by other materials used in engineering because it is extremely sensitive to heat – it starts to temper at about 220oC. This softenin g process continues as the temperature rises. As a result cutting using this material for tools is limited to speeds up to 0. 15 m/s for machining mild steel with lots of coolant. Carbon steel is generally unstable and very inexpensive. Although it is considered obsolete today it is still found in non-intensive applications such as hand operated tools (e. g. reamers and taps). It has a hardness of up to about HRC 65 and sharp cutting edges are achievable with it. High Speed Steel (HSS) This range of metals contains about 7% carbon, 4% chromium plus additions of tungsten, vanadium, molybdenum and cobalt. These metals maintain a hardness of up to about HRC 67 at temperature up to about 600o, but soften rapidly at higher temperatures. These materials are suitable for cutting mild steel at speeds up maximum rates of 0. m/s to 1. 8 m/s and sharp cutting edges possible. HSS is unstable but inexpensive. In fact it is the most common cutting tool material used today and is used extensively on drill bits and taps. HSS Cobalt These are high cobalt versions of HSS that are very resistant to heat and thus excellent for machining abrasive and/or work hardening materials such as titanium and stainless steel. They are unstable and moderately expensive and are used extensively on milling cutters and drill bits. They have a hardness of up to about HRC 70 and sharp cutting edges possible. Cast Alloys These metals are stable and expensive but somewhat fragile. Despite their stability they dont allow for high machining speed due to low hardness and are not used much. They have a hardness of up to about HRC 65 and sharp cutting edges possible. Cast Cobalt Alloys These materials are made of various non ferrous metals in a cobalt base. They can withstand cutting temperatures of up to 760oC and are capable of cutting speeds about 60% higher than HSS. They are made of 38 – 53% Cobalt, 30 – 33% Chromium and 10 – 20 % Tungsten. They have a hardness of 58-64 HRC and good wear resistance but little toughness. They are not suitable for intermittent cutting but are good for deep boring and continuous turning is better than HSS. Cemented Carbides These materials usually consist of tungsten carbide or a mixture of tungsten carbide, titanium, or tantalum carbide in powder form, sintered in a matrix of cobalt or nickel. As they are expensive and have low rupture strength they are normally made in the form of tips which are brazed or clamped on a steel shank. The clamped tips are generally used as throw away inserts. Cemented carbide is stable and the most common material used in the industry today. It is offered in several grades and offers a resistance to abrasion. Its main use is in turning tool bits although it is very common in milling cutters and saw blades. It supports a hardness of up to about HRC 90 and sharp edges are generally not recommended. Coated Carbides The cutting system is based on providing a thin layer of high wear-resistant titanium carbide fused to a conventional tough grade carbide insert, thus achieving a tool combining the wear resistance of one material with the wear resistance of another. These systems provide a longer wear resistance and a higher cutting speed compared to conventional carbides. Ceramics Ceramics are made by powder metallurgy from aluminium oxide with additions of titanium oxide and magnesium oxide to improve cutting properties. They are stable and moderately inexpensive. Chemically inert and extremely resistant to heat, ceramics are usually desirable in high speed applications however they are brittle and have little resistance to shock. Ceramics are considered unpredictable under unfavourable conditions. Their use is therefore limited to tips used for continuous high speed cutting on vibration-free machines. The most common ceramic materials are based on alumina (aluminium oxide), silicon nitride and silicon carbide. They are used almost exclusively on turning tool bits. They have a hardness up to about HRC 93 and sharp cutting edges and positive rake angles are to be avoided. Cermets Cermets are stable and moderately expensive. They are cemented materials based on titanium carbide (TiC). They binder is usually nickel, which provides higher abrasion resistance compared to tungsten carbide at the expense of some toughness. It is also far more chemically inert than tungsten. Cermets have an extremely high resistance to abrasion. They are used primarily on turning tool bits although research is being carried on producing other cutting tools. They have a hardness of up to about HRC 93 and sharp edges with them are generally not recommended.? Cubic Boron Nitride (CBN) CBN is the second hardest substance known but it is also the second most fragile. It is stable and expensive. CBN offers extremely high resistance to abrasion at the expense of much toughness. It is generally used in a machining process called hard machining, which involves running the tool or the part fast enough to melt it before it touches the edge, softening it considerably; it is used almost exclusively on turning tool bits. CBN has hardness higher than HRC 95 and sharp edges are generally not recommended with it. Diamonds The hardest substance known to date, diamonds have limited application due to the high cost and the small size of the stones. They are stable and are used on very hard materials to produce a fine finish and on soft materials, especially those inclined to clog other cutting materials. They offer superior resistance to abrasion but also high chemical affinity to iron which results in them being unsuitable for steel machining. Extremely fragile, they are generally used at very high cutting speed with low feed and light cuts. Due to the brittleness of the diamonds the machine has to be designed to be vibration free. The tools last for 10 (up to 400) times longer than carbide based tools. Diamonds are used almost exclusively on turning tool bits although they can be used as a coating on many kinds of tools. Sharp edges generally not recommended. ? CUTTING FLUIDS Cutting fluids are used in metal machining for a variety of reasons such as: -Improving tool life -Reducing work piece thermal deformation -Improving surface finish -Flushing away chips from the cutting zone The properties of a good cutting are: Maintaining thermal stability of the work piece †¢Maximising the life of the cutting tip by lubricating the working edge and reducing tip welding. †¢Ensuring safety for the people handling it (toxicity, bacteria, fungi) and for the environment upon disposal. †¢Preventing rust on machine parts and cutters. Cutting fluids fall into one of five categories: -Liquid -Paste or gels -Aerosols -CO2 C oolants -Air or other gases Liquid There are four main types of liquid cutting fluids: †¢Straight oils †¢Soluble oils †¢Semisynthetic fluids †¢Synthetic fluids Straight Oils Straight oils are non-emulsifiable and are used in machining operations in an undiluted form. They are composed of a base mineral or petroleum oil and often contain polar lubricants such as fats, vegetable oils and esters as well as extreme pressure additives such as Chlorine, Sulphur and Phosphorus. Straight oils provide the best lubrication and the poorest cooling characteristics among cutting fluids. Synthetic Fluids They contain no petroleum or mineral oil base and instead are formulated from alkaline inorganic and organic compounds along with additives for corrosion inhibition. They are generally used in a diluted form (usual concentration 3 to 10%). Synthetic fluids often provide the best cooling performance among all cutting fluids. Soluble Oil Fluids They form an emulsion when mixed with water. The concentrate consists of a base mineral oil and emulsifiers to help produce a stable emulsion. They are used in a diluted form (usual concentration 3 to 10%) and provide good lubrication and heat transfer performance. They are widely used in industry and are the least expensive among all cutting fluids. Semi-synthetic Fluids They are essentially a combination of synthetic and soluble oil fluids and have characteristics common to both types. The cost and heat transfer performance of semi-synthetic fluids lies between those of synthetic and soluble oil fluids. Pastes or Gels They are used for some applications, in particular hand operations such as drilling and tapping. In sawing metal with a bandsaw, it is common to periodically run a stick of paste against the blade. This product is similar in form factor to lipstick or beeswax. It comes in a cardboard tube, which gets slowly consumed with each application. Aerosols Some cutting fluids are used in aerosol (mist) form. They were traditionally regarded as a health hazard to workers and notoriously difficult to use with precision. However, a newer form of aerosol delivery, MQL (minimum quantity of lubricant), avoids both of those problems. The delivery of the aerosol is directly through the flutes of the tool, i. e. through or around the insert itself. MQL is delivered in such a precisely targeted way that it can be regarded as almost like dry machining. The chips generally seem like dry-machined chips, requiring no draining, and the air is very clean. MQL doesnt provide much cooling in the sense of heat transfer, but its well-targeted lubricating action prevents some of the heat from being generated in the first place, which helps to explain its success. CO2 Coolant Carbon Dioxide can also be used as a coolant. In this application pressurized liquid CO2 is allowed to expand and following the ideal gas law, this is accompanied by a drop in temperature, enough to cause a change of phase into a solid. These solid crystals are redirected into the cut zone by either external nozzles or through-the-spindle delivery, to provide temperature controlled cooling of the cutting tool and work piece. Existing CNC machines can be retrofitted with this safe and environmentally coolant approach. In applications such as turning, milling or drilling tool life and throughput have been improved substantially, especially in High Temperature Alloys such as titanium, 4140, steels and plastics. Air or other gases Compressed air, supplied through pipes and hoses from an air compressor and discharged from a nozzle aimed at the tool, is sometimes used as a coolant. The force of the decompressing air stream blows chips away, and the decompression itself has a slight degree of cooling action. The net result is that the heat of the machining cut is carried away a bit better than by ambient air alone. Liquid nitrogen, supplied in pressurized steel bottles, is sometimes used in similar fashion. Cutting Fluid Selection Criteria The principal criteria for selection of a cutting fluid for a given machining operation are: †¢Process performance : oHeat transfer performance oLubrication performance oChip flushing oFluid mist generation oFluid carry-off in chips oCorrosion inhibition oFluid stability (for emulsions) †¢Cost Performance Environmental Performance †¢Health Hazard Performance Cutting Fluid Maintenance and Disposal Cutting fluid maintenance involves checking the following variables: -Concentration of soluble oil emulsions (using refractometers) -PH (using a pH meter) -Quantity of tramp oil (hydraulic oil leaking into the cutting fluid system) -Quantity of particulates in the fluid. Action taken to maintain the fluid includes -Adding make-up concentrate or water -Skimming of tramp oil -Adding biocides to prevent bacterial growth -Filtering the particulates by centrifuging

Perks of Being a Wallflower Context Analysis Essay Example

Perks of Being a Wallflower Context Analysis Essay The Perks of Being a Wall? ower: Context Analysis Paper ! Stephen Chbosky, a 29 year-old ? lm director and screenwriter published his ? rst semi-autobiographical novel in 1991, The Perks of Being a Wall? ower. He later directed the movie in 2011 and released it in October 2012. The central theme of the story revolves around the struggle to understand the terrible things that inevitably happen to those we love and to ourselves. It unfolds through a series of letters written by the main character, Charlie, addressed to us, the reader, that detail his painful yet joyous freshman year of high school. Chbosky frames the ? m only loosely in this way, preferring showing over telling — we never see Charlie talking to the camera. The novel has been a â€Å"backlist staple for the publisher, consistently selling between 70,000 and 100,000 copies in paper each year through the outlets recorded by Nielsen BookScan† (C. J. , 2012). According to Anthony Ziccardi, v-p and deputy publi sher of Simon Schuster, â€Å"it has always been a big seller in the college market. † The movie tie-in edition, with the lead actors on the front cover, sells just as frequently as the original. It’s do doubt that the rhetor of Perks of Being a Wall? wer hit success with his novel, but the movie proves to do the same. ! This striking theme and complex plot of a typical, teen â€Å"problem† story doesn’t dwell on a divorce or accidental pregnancy. This story has â€Å"developed a cult following it† as a teen reader responds how it does more, â€Å"it reminded me of me and my friends, totally and completely† (Spitz, 1999). The ? lm functions similarly. It’s unique yet edgy, which makes it different and relatable at the same time. Even though Chbosky studied ? lm speci? cally, his ? rst novel was a huge success. This single literary work in erotic ? ction transforms marvelously onto the big screen. We will write a custom essay sample on Perks of Being a Wallflower Context Analysis specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Perks of Being a Wallflower Context Analysis specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Perks of Being a Wallflower Context Analysis specifically for you FOR ONLY $16.38 $13.9/page Hire Writer I think that his ? lm background is largely to thank for this. Not many writers can direct their own movies. Chbosky’s young age and talent allow him to reach a young adult audience in a way many cannot. I believe that he created this work of rhetoric, the ? lm as well as the novel, to portray a stark realness to the story of a coming-of-age 15 year-old boy where so many can relate. ! Mr. Mudd Productions, producers of Juno, sought to hire Chbosky to create the ?lm adaption. The producers of the ? lm, John Malkovich, Lianna Halfon, and Russell Smith then hired him to write the adapted screenplay and to direct the ? lm. Logan Lerman, Emma Watson and Ezra Miller starred in the ? lm. The production even waited for Emma Watson to ? nish with Harry Potter before beginning. The ? lm was shot in the Pittsburgh area from May 9, to June 29, 2011 and set in the early 1990s. A few scenes from the characters’ adventures with the The Rocky Horror Picture Show were ? lmed at The Hollywood Theater in Dormont. Chbosky had seen The Rocky Horror Picture Show when he was younger in that theater and found out it was reopening, so requested to rent it for ? lming (Fischer, 2011). ! Interestingly, the novel was semi-autobiographical. In an interview with Tara Aquino, Chbosky explains that it was always intended to become a movie and â€Å"thought of the title 21 years ago† (Aquino, 2012). Though it was always his plan to write a produce a great narrative, what made him begin writing in the ? rst place was initially a bad break up. He needed something to give himself hope. Charlie, the main character, struggled similarly in trying to answer the question of why good people allow themselves to be treated less than what they deserve. Throughout the writing process, Chbosky was able to ? nd a better place. The audience is coming-of-age young adults. He was able to hit his audience perfectly. So many people still come up to him and let him know how much the books helped them in hard times to not feel alone. That reward alone is enough Chbosky claimed and helps him â€Å"feel far more connected to people than he ever did† (Aquino, 2012). Though many producers wanted to take over the adaption of The Perks of Being a Wall? ower, Chbosky couldn’t let it go. The casting was very important to Chbosky, because he wanted not only people that reminded him of his own life but also generous and real people. He met with Emma Watson once and knew she was a perfect character for Sam, exploring the wilder side of herself. The main character, cast as Logan Lerman, is actually really con? dent in real life. Chbosky wanted to have him audition as Patrick at ? rst, be Lerman knew he wanted Charlie. Finally, Ezra Miller’s charismatic personality put him as Patrick. ! Stephen Chbosky and Logan Lerman certainly shared a bond. Chbosky put a lot of faith in Lerman to embody a character that Chbosky sees in himself. He said their relationship developed quickly and evolved over time. He recalls a photograph of the two of their backs, and â€Å"what’s amazing is—I had no idea this was happening—we both have roughly the same posture, and we started to meld. I don’t know if he was getting things from me or if it was just a natural kind  of camaraderie, but it de? nitely happened† (Aquino, 2012). Chbosky even remembers how special it was on the set for these actors who have never had a proper prom or graduation to experience these things on and off-screen. Chbosky shared one of the most locations of ? lming with the three cast members the ? rst night of ? lming. He took them through the Fort Pitt Tunnel which brought them closer â€Å"but also made them understand [his] vision for the movie and how beautiful [he] felt the movie was† (Aquino, 2012). I think this is an extremely mportant moment for Chbosky in really expressing what the story of The Perks of Being a Wall? ower means to him by letting the kids feel it for themselves. Watching the actors come together and be there for each other in the short time they had for ? lming really gave him a sense of contentment that they were becoming the characters he remember s years ago during his hard, yet joyous days. I believe that all young adults who have either read the book or watched the ? lm can connect with these characters. Chbosky’s number one goal was to help people with or without friends not feel so alone. The actors played a huge role in the ? m’s success for achieving that by staying true to Chbosky’s vision in the novel and carrying over its dif? cult and confusing reality to the big screen. ! As mentioned before, the novel earned great success, before and after the ? lm. Entertainment Weekly gave the ? lm of an average ‘B’ rating. A reporter from the San Francisco Chronicle, Amy Biancolli, applauds the ? lm for steering away from â€Å"following certain narrative conventions so closely, that we think we know what’s coming around every bend. With The Perks of Being a Wall? ower, when something different hits us, the impact leaves a bruise† (Biancolli, 2012). This ? lm ? nds an unexpected freshness in the old cliches by remaining attentive to all that happens within and between unhappy teenagers. One of the ? lm’s major critiques is that it isn’t strong on plot — all of the energy and likability doesn’t sustain the movies second half, which tries to present wishful fantasies as sort of realistic developments. Also, the lead character is frustratingly passive at times. Sometimes an inexperienced ? lmmaker can use a helping hand from his cast. Luckily, Stephen Chbosky got that from Logan Lerman, Ezra Miller and Emma Watson in the adaptation of the popular novel. This was only Chbosky’s second time in the director’s chair, and like his main character, he’s a little unsteady on his feet. I think this in an interesting comparison, because thanks to Chbosky’s stars, the ? lm — like the book — sets itself apart from other comedy-drama coming-of-age ? lms as a smartly observed study of a troubled teens ? rst year in high school. When Charlie is distant, the camera remains as a ? y on wall. As he becomes more engaged, the camera draws closer to him and his friends, creating real intimacy between viewer and characters. The ? m, just like the novel, succeeds so well because of the connection and relation between Chbosky and his characters. So though Chbosky is new to the industry, in a way, the ? lm is able to develop better because of that. Also, the ? lm lacks necessary creativity to be considered a classic. NY Daily News says that, â€Å"though the ? lm is set in early ’90s Pittsburgh, it’s lacking the creative details required of a classic. And the ones we do get tend to feel off: Would Sam and Patrick, vinyl devotees who adore The Smiths, really be so entranced by Dexys Midnight Runners and so mysti? d by David Bowie? † Other than lacking experience and a few creative details, critiques commend Chbosky on recreating a unique narrative on the pleasures of friendship and the wisdom gained from adolescent misery. ! Stephen Chbosky, the semi-autobiographical writer and director of The Perks of Being a Wall? ower, creates an artifact worth watching. This being his ? rst novel and second time as a director, the 29 year-old produces the novel and ? lm to reach a troubled young adult audience to remind them that they are not alone. He does so by closely selecting his characters for the ? m adaption and, more so, mirroring his central character’s emotional state. Chbosky primary mission succeeds: To show how loneliness can become companionship, and to acknowledge that by surviving together, we can rise above adolescent despair. The Perks of Being a Wall? ower has a kind quality almost unheard of in American movies of this genre.

Heavy Metal Definition and List

Heavy Metal Definition and List A heavy metal is a dense metal that is (usually) toxic at low concentrations. Although the phrase heavy metal is common, there is no standard definition assigning metals as heavy metals.   Characteristics of Heavy Metals Some lighter metals and metalloids are toxic and, thus, are termed heavy metals though some heavy metals, such as gold, typically are not toxic. ​ Most heavy metals have a high atomic number, atomic weight and a specific gravity greater than 5.0 Heavy metals include some metalloids, transition metals, basic metals, lanthanides,  and actinides. Although some metals meet certain criteria and not others, most would agree the elements mercury, bismuth, and lead are toxic metals with sufficiently high density. Examples of heavy metals include lead, mercury, cadmium, sometimes chromium. Less commonly, metals including iron, copper, zinc, aluminum, beryllium, cobalt, manganese and arsenic may be considered heavy metals. List of Heavy Metals If you go by the definition of a heavy metal as a metallic element with a density greater than 5, then the list of heavy metals is: TitaniumVanadiumChromiumManganeseIronCobaltNickelCopperZincGalliumGermaniumArsenicZirconiumNiobiumMolybdenumTechnetiumRutheniumRhodiumPalladiumSilverCadmiumIndiumTinTelluriumLutetiumHafniumTantalumTungstenRheniumOsmiumIridiumPlatinumGoldMercuryThalliumLeadBismuthPoloniumAstatineLanthanumCeriumPraseodymiumNeodymiumPromethiumSamariumEuropiumGadoliniumTerbiumDysprosiumHolmiumErbiumThuliumYtterbiumActiniumThoriumProtactiniumUraniumNeptuniumPlutoniumAmericiumCuriumBerkeliumCaliforniumEinsteiniumFermiumNobeliumRadiumLawrenciumRutherfordiumDubniumSeaborgiumBohriumHassiumMeitneriumDarmstadtiumRoentgeniumCoperniciumElements 113-118 Keep in mind, this list includes both natural and synthetic elements, as well as elements that are heavy, but necessary for animal and plant nutrition.

Pesky Colons and Semicolons

Pesky Colons and Semicolons Pesky Colons and Semicolons Pesky Colons and Semicolons By Catherine Osborn These two forms of punctuation are often used incorrectly for one another. Colons can be used to direct a reader to examples or significant words: His main flaw is his downfall: egotism. Also, they direct a reader to a list of things: A lot of vegetables are the same color: lettuce, peppers, snow peas, and celery. Where a colon can be confused for semicolon usage is when it joins two sentences and the second sentence illustrates the first: Most critics agree on one point: Titanic was his crowning achievement. Semicolons are mainly used to combine two disjointed, yet related, thoughts. As I drove home I reflected on the movie; it had a certain quality to it that made me reminiscent. Also, semicolons mark more emphasis than just a comma and can be used like so: Hand Sally the tomato; it belongs to her. Semicolons can be used to separate one list from another: We learned the basics of grammar, punctuation, and spelling; the ins and outs of brainstorming and getting started; and how to take notes in an interview. Semicolons can also join independent clauses that are joined by words like however, therefore, nevertheless, moreover, etc He started his career in the theater; however, he quickly made his way into films. Bottom line: Semicolons are not used to introduce quotations or lists. Colons are not interchangeable with semicolons either. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Punctuation category, check our popular posts, or choose a related post below:7 Examples of Passive Voice (And How To Fix Them)Story Writing 101Preposition Review #1: Chance of vs. Chance for

Statistical Analysis Math Speech or Presentation - 1

Statistical Analysis Math - Speech or Presentation Example A population is defined as the complete collection of all elements of the target groups (individuals, items or objects) whose characteristics are being studied (Brase and Brase 6). The population in this research is the total students in the second semester Bachelor of Human Resources class. A sample is defined as the subset of the population, which consists of a portion of the population selected for study (Brase and Brase 6). In this case, the sample in this research is the male and female students with slightly or very overweight. This is because these overweight students were being drawn and identified from the total 100 students, so the 100 students is the set and overweight students is the subset of the 100 students. The purpose of constructing the frequency table is to show the distribution of the percentages of male, female and total students with slightly or very overweight into classes or intervals. By constructing the classes or intervals, the percentages in the respective category can be fit into exactly one class. The frequency table with the design containing the class limit, class boundary and frequency of male, female and total students with slightly or very overweight was constructed in order for us to compare the data distribution clearly between the percentages of male, female and total students with slightly or very overweight. In order to evaluate is there any significance different between the mean percentages of male and female students with slightly of very overweight, two-tailed t-test analysis is carried out at the confidence interval of 90%. The mean percentages of the male students with slightly or very overweight is partially skewed to the right because the mode has a lower value than the median and mean has the lower value than the median, but in this case, the mean is slightly higher than the median, which in turn make the distribution partially skewed to the right. The mean percentages of the female students with

HumanDocuments Essay Example | Topics and Well Written Essays - 1250 words

HumanDocuments - Essay Example The introduction of cotton produced a positive effect which completely changed the highly agricultural population towards becoming a manufacturing community. Significant transformations within the society became notable and the social setting was transformed through the way individuals behave within the society (Guest, 28). Traditionally majority of the population within this region relied on arable farming to produce food for their households and any surplus would be sold. The modern day township of Manchester has become inhabited by highly industrious individuals (Kay, 44) The society within the region was comprised of individuals who upheld and believed in the high moral standards as a way of life (Guest, 26). The settlement of disputes, which rarely occurred was undertaken by clergymen, whose authority was unquestionable (Guest, 26). The harmony which existed within the community surrounding the region had since been lost and the society had become highly permissive (Guest, 27). Social norms were observed by all the members of the society, an aspect which enhanced the peace and tranquillity of the region (Kay, 45). The society could be described as having been highly religious as the observation of religious virtues was considered a mandatory aspect of human livelihood. The dress code of the people could testify to the religious beliefs upheld by the people (Tignor et al., 583). Events occurring in relation to the introduction of cotton resulted in an overall transformation of the society and this caused the people to move away for their beloved s ocial norms to other secular behaviours (Kay, 45; Guest, 27). According to Guest, farmers within the regions were content with their traditional and cultural responsibilities and showed little support for transformations occurring within the society (Guest, 27). Men worked and provided for their families and were heavily dependent on their families for social and

The Role of Technical Teacher Education Essay Example for Free

The Role of Technical Teacher Education Essay Countries of the world are classified as developed or under developed based on the level of education of its citizenry and their ability to use knowledge, skill and attitude to translate scientific ideas in attending to the problems of mankind. Technical education is the right kind of education that is capable of training individuals to translate ideas into products that will assist mankind to do things with ease. The teaching of technical subjects is conducted by the technical teacher. This paper is of the view that the technical teacher who is properly trained and is working under ideal environment can train younger generation that will be free of poverty, achieve universal basic education, empower women, reduce child mortality, combat HIV/AIDS and develop global partnership, thus achieving the MDGs target. The paper made recommendations among which is for the MDGs to adopt the bottom to top mode of funding and the need for the MDGs to integrate provision of funds particularly for purchase of training tools, equipment and infrastructure for technical teacher training. Introduction Education is seen as an agent of development in any society of the world, that is why societies that are educated are looked at as developed societies and less educated as underdeveloped societies. This is so because the developed societies use education to develop things that will solve prevailing problems of mankind in the form of products of technology. These products are developed by citizens of these countries using skills, knowledge and attitudes acquired through training in sciences and technical based subjects. It is in realization of these facts that the Federal Republic of Nigeria (FRN) (2004) stressed that, science and technology shall continue to be taught in an integrated manner in the schools to promote in the students the appreciation of practical application of ideas. This type of education if acquired will provide students with sellable skills that can be used to generate job opportunities and alternatively reduce poverty. It  should however be noted that, training cannot take place unless there are teachers that are properly trained in technical teacher training institutions to impact the required skills, knowledge and attitudes in the students. That is why Olaitan (1986) sees the teacher as an agent of changing people attitudes, beliefs and values using the right technique. Similarly Adeoye (2008) noted that the teacher is the king-pin of quality in education and development of the society. In the same light Garba (2002) posits that the success of technological development of any nation begins with the quality of technical teachers as no education system can rise above the quality of its teachers (FRN, 2004). The millennium development goals (MDGs) is a global strategy aimed at reducing poverty, hunger, insecurity, gender inequality, achieve universal basic education, reduce child mortality, improve maternal health, combat HIV/AIDS, malaria, ensure environmental sustainability and develop a global partnership for development. This paper is of the opinion that the achievement of the MDGs can best be aimed at if the right quality and quantity of technical teachers are produced. The paper therefore discusses technical teachers preparation and production in Nigeria, the MDGs and the objective relating to education, the role of technical teacher education in realization of MDGs target, Factors affecting technical teacher education in realizing the goals of the MDGs and recommendation were offered. Technical Teacher Preparation and Production Programme in Nigeria. There is always the need to create an awareness of the problems, which arise in a particular profession and to improve on the level of competencies for dealing with such problem (Adetunji and Victor (1997) that is why the National Policy on Education (2004), indicates that, teacher education shall continue to be given major emphasis in all educational planning and development, it further stated that teacher education shall be structured to take cognizance of changes in methodology and the curriculum, by ensuring that teachers are fully exposed to innovation in their profession. This is most needed by the technical teacher because of the dynamic nature of the world of technology and its effect on the teaching of technical subjects. Ali (1992) stressed that with the advert of the 21st century technologies, the requisition of sound academic knowledge and professional skills are fundamental in the training of teachers, especially in the use of modern methods and technologies for teaching their subject area. Foel and Fritz (1998) noted that teacher education is experiencing new formats that combine conventional (Traditional education delivery system) with evolving technology in order to transfer knowledge to students. That is why Goro (2000) call for a new look at the training of teachers, especially the technical teachers because the present educational system’s particular concern is that teachers must be oriented towards development of practical skills in the trainees. The technical teacher is he who is a master of the trade, in the same manner is able to impart the correct and up-to-date skills (Olaitan 1986), in a similar view Dambe and Garba (2007) looked at the technical teacher as a teacher who posses practical and theoretical knowledge of his vocation, has clear understanding of the student he teachers, and ensures that he increases in the knowledge of his field at all time. The training process of a technical teacher therefore calls for a balance of theoretical and practical knowledge. In a bid to train teachers that will posses the required knowledge that Ali (1992) looked at training the technical teacher, by using the concurrent cause approach, where professional trade skills and academic content are pursued in parallel. This mode of training is the most popular approach used for technical teacher training. However, another school of thought was that the technical teacher should first be practically skilled in that subject matter before embarking on pedagogical skill acquisition. Goro (2000) shares the same view as he indicates a support for post graduate training in education after a professional training in trade. Whatever the approach, the emphasis should be on striking a balanced knowledge that will enable the teacher impart the required skills in an appropriate manner. This is necessary because the success or failure of technological development of a society begins with the quality of manpower (teachers) responsible for training the technology teachers. Olaitan (1996) looked at the technical teacher training in Nigeria to include the formal and informal training. The informal is done at the home or family level, and the apprenticeship level, the graduates of which will be serving as masters to train others. However, the formal training of teachers is in three stages, the Nigeria certificate in education (NCE) which prepares teachers for teaching in junior secondary schools. There is also the graduate and postgraduate technical teacher education programme. In the same view Abdullahi and Sa’i (1998) pointed out that technical teacher training is provided in three stages namely the postgraduate, the bachelor and the Nigerian Certificate in Education (Technical) levels. There are however two modes of preparing technical teachers at the NCE level for teaching in the junior secondary schools’ the two modes are in agreement with two vocational administrative theories of dual and single controls (Olaitan 1996). Accordingly, the single control is a situation whereby technical teacher education is housed in institution that are offering purely technical teacher education courses e. g. Colleges of Education (Technical), whereas the dual control is when technical education Porgramme are run in the same institution with other courses like arts, social studies, history, pure science as obtains in conventional colleges of education. Students of Technical Education Programmes at the NCE level are expected to take courses from general area in Technical/Vocational Education, general Education, Education and Entrepreneurship Education, and are later expected to specialize in one area before graduation. Students are further expected to spend twelve (12) weeks of industrial attachment (NCCE 2002) after graduation; the products are expected to teach introductory technology at the junior secondary school level. As of now there are twenty five (25) Colleges of Education offering NEC (Technical) courses in Nigeria. (NCCE, 2007). At the graduate and post graduate levels, the training of vocational technical teachers take place in the Universities. As at now the five Universities of technology namely, Federal Universities of Technology, Akure, Bauchi, Minna, Owerri and Yola are running degree and postgraduate programmes in Technology Education and other Vocational areas. Other Unversities such as Ahmadu Bello Unversities Zaria, Benin, Calabar, University of Nigeria Nsukka, Uyo, and Ibadan run degree and postgraduate programmes in vocational technical education. It should be noted however that, some colleges of education are currently running programmes leading to the award of a bachelor degree in Technical and vocational Education as affiliate colleges of Universities (NCCE 2002). The millennium Development Goals (MDGs) The vision of developers of the MDGs was on the general concern to do away with problems affecting the citizens of their nations. That is why they aimed at creating strategies towards reduction of poverty, hunger, diseases, increase access to education, health, housing and sustainable management of the environments resource. In the development of the MDGs and strategies for achieving the goals, 189 countries of the world met in New York in September 2000, and signed the millennium declaration which has come to be globally known as the millennium Development Goals (MDGs). The primary goal of the leaders of these nations in developing the MDGs is to address the problems facing fellow men, women and children such as abject poverty and dehumanizing conditions to which more than a billion people across the world are subjected to. (Umar, Suleiman Adamu, 2009). Accordingly Dung-Gwon (2009), noted that the MDGs have 8 goals, each has one or more targets and several indicators. He further report that, in 2002, there were 18 targets and 48 indicators. In 2007, 4 more targets were added. To this effect, countries of the world have also added their own targets and indicators to meet their aspiration. This is so because the levels of development of various nations are not the same, so also prioties vary among nations. The MDGs is therefore, a general blue print for development of nations of the world. Dung-Gwom (2009) states that the general MDGs goals statement across the nations are as follows: 1. Eradication of extreme poverty and hunger 2. Achieving universal primary education 3. Promote gender equality and women empowerment 4. Reducing child mortality 5. Improve maternal health 6. Combat HIV/AIDS 7. Ensure environmental sustainability 8. Develop a global partnership The general goals of the MDGs have within it three that are education related. Iyortyer (2010) noted that, the three goals that mainly impacts on the education sector are: Achieving Universal Basic Education (Goal 2) Promotion of gender parity or equality (Goal 3) Combat HIV/AIDS, malaria and other diseases (Goal 6) Three goals out of eight focusing on education surely indicates that a priority to education is a step towards the attainment of other objectives, as stated by Iyortyer (2010) that education is an instrument for development of any nation, an antidote to poverty and the key for unlocking natural resources. In spite of these and the laudable goals and strategies towards achieving the MDGs in Nigeria, records still reveals that much is desired. In line with this Ibrahim (2006) states that, Nigeria Millennium Development Goals Report for 2004 and 2005 shows that Nigeria is far off the mark in terms of implementation of many goals of the MDGs. Similarly Igbugo in Umar, Suleiman and Adamu (2009) asserted that, there is a serious doubt if Nigeria can achieve the MDGs by the target 2015. So also Igbuzor (2007) reported that even though Nigeria is a signatory to the MDGs, it is yet far from achieving the MDGs, furthermore he maintained that it is lack of political will that is the greatest stumbling block to the achievement of the MDGs, in Nigeria. Based on the MDGs report and personal observations of the indices it is clear that much is desired. This paper is of the opinion that provision of training that equip the individual with saleable skills will greatly lead Nigeria to the achievement of the MDGs. Role of Technical Teacher Education in Realization of the MDGs Technical teacher education programme is a programme that train teachers of technically based trades who are expected to teach in junior secondary schools and technical colleges. The product of which are the country futures engineers and inventors. The role of technical teacher in the achievement of MDGs will be discussed in line with the eight MDGs as follows: 1. Eradication of extreme poverty and hunger. Even though report of MDGs 2005 shows slide decline in poverty from 65. 5% in 1996 to 54. 4% in 2004. Much is still desired as the 54. 4% is still high and should attract concern bearing in mind that Nigeria is a rich country with poor citizenry. With a technical teacher programme that is able to produce highly trained technical teachers. The teacher should be able to train future generation of students that will possess the required skill in various trades. The skill acquired will create jobs that will make the individual either self employment or be employed by any employer of labour. Federal Republic of Nigeria (2004) indicates that, technical education is a means of preparing for occupational field and a means of alleviating poverty. 2. Achieve Universal Primary Education The MDGs report 2005, shows that there is great improvement in literacy level, however, Iyortyer (2010) revealed that the target of the MDGs indicators maintain that adult literacy rate for 15-24 years will improve to reach 89% in 2015. While gender equity and equitable access to basic and continuing education for adult will be pursued towards meeting up the target. To achieve this target, there is the need for teacher that will be responsible for teaching of craft, poetry and the Basic technology. The teacher that is trained for such is the technical teacher. 3. Promote Gender Equality and Empowerment One of the targets of the MDGs is to ensure that gender disparity is eliminated, and equal access to education is same for both boys and girls. However Dung- Gwom (2009) indicates that the percentage of boys is 82% in 1990 and 79% in 2004. This shows that boys still account for greater percentage of primary school pupils. Much is still desired, and it is one of the responsibilities of the teacher to sensitize parents as they live in the society with the parents and the pupils. 4. Reduce Child Mortality With more educated mothers who have acquired skills for employment, mortality rate of the child will be highly reduced, as most of the causes of child mortality are poverty related. Similarly with a generation of young talents equipped with technical skill, the skill can further be used in the  provision and maintenance of medical equipment that will be used in reduction of child mortality. 5. Improve Maternal Health The MDGs report 2004 shows that maternal mortality was 74 per 1000. This rate is high and can only be reduced if mothers are equipped with skill to earn a living. The skills of the technical teacher can be directed to the mothers for empowerment. 6. Combat HIV/AIDS, Malaria and other Diseases In Nigeria the incidence of HIV/AIDS has been on upward trend since the diseases was discovered in the country 1. 8% 1999, to 5. 8% in 2000 (Nigeria, MDG Report 2005). A good number of the infected persons are equally, living under poverty, with no job and so they could not afford the feeding requirements even if the drugs are free. The situation would have not been the same if they have learnt technical skills to provide services for pay. 7. Ensure Environment Sustainability To sustain the environment, there is the need to have the knowledge, skills and attitude of doing such. Umar, Suleiman and Adamu (2009) reports that about 70% of the urban dwellers in Nigeria live below poverty bench mark and their condition is not bound to improve much between now and 2015. This can be better if a good number of Nigerians are equipped with skills in technical trades such as Building maintenance, Design and plumbing, Vehicle maintenance etc 8. Develop a Global Partnership for Development The world is becoming a global village, this is much so because of the advent of technological product especially in the area of information and communication technology (ICT). With ICT information is obtained and utilized. However to do that one need the basic training to understand the technology and the kwon how of applying it. Challenges of Technical Teacher Education in Realizing the MDGs. Technical teacher education can do a lot in the realization of the MDGs, but the followings have stood as a barrier. 1. Lack of adequate funding Technical teacher education being a technical oriented programme requires tools equipment and infrastructure without which technical education cannot be said to be offered. It is however clear that general funding to education in Nigeria is far from the expected. Onyidoh (2006) noted that, the money allocated to education falls short of the UNESCO’s recommended 25% of annual budget; he further noted that the allocation from 2003 to date is barely in the range of 1. 83-5% allocation to education. This might surely not be enough to cater for the funding of institutions that are characterized by, leaking roofs, unpaved floors, unsanitized conditions and general picture of neglect. This situation cannot guarantee training of technical teachers with the needed skills for the training of younger generation in our junior secondary schools that are expected to pave way for the technological advancement of Nigeria 2. Administrator’s attitude. Even with the low level of funding in the budget, other agencies such as the Education trust fund (ETF) do intervene. It is however regrettable that a lot of institutions of higher learning cannot accesses the fund due to stringent conditions for accessing the ETF money which does not give much room for diversion of the fund. And for the fact that most of these administrator are not there because they have interest in the system,. they prefer to forfeit the ETF than follow due process to access it. Speaking on the administrator’s attitude Onyidoh (2010) noted that administrators have little interest in institution they are heading, because vice chancellors, provost and rectors appointed in Nigeria today are politicians in the academic robes. 3. MDGs approach to funding Due to corruption and non-commitment of leadership of institutions they have found the MDGs money easy to grab than the ETF, because the MDGs money do came directly to them in the name of so call desk officers who in most cases are the good boy and girls of the leaders of the institution. That is why in many cases projects already financed through other means are tagged MDGs project and after inspection, tags can be replaced, that is the game as usual. 4. Absence of infrastructure Technical teacher education require infrastructure such as workshops, classrooms and the needed equipment. This infrastructure is absent or not enough in most of the institutions that are responsible for training the technical teachers. The situation will make the teacher unable to provide the right training to the junior secondary school students who are expected to be the future engineers, technician etc that will move Nigeria forward. 5. New Technologies The training to be given in junior secondary schools by technical teachers should be to introduce them to the world of technology and arose interest of the students in choice of vocation and to lead students to have intelligent understanding of the increasing complexity of technology (FRN, 2004). The continuous inventions of new technological products that most of the institutions teachers are not familiar with the operation principles of the new technologies. For the training to be relevant, it must bear a direct relationship with that in the industries, firms or business required to enable students fit into their vocations after graduation (Aguisiobe, in Garba and Nuhu, 2007). The existing situation in institution is far from the state of art as some of the machines were in existence since the 1970s or 1980. They cannot provide any training on new technologies of whatever level. 6. In-sincerity of Nigerian leaders. Most policy statements in Nigeria sound good, but when it comes to implementation the problem arises. This is so because as policies are implemented those in authorities will begin to skim for what to personally get out of it. Take for instance the issues of universal basic education programme, it has a policy that pupil will be provided meals during school hours and that primary school teachers salaries will be 5 times through 2015. At the beginning skeletal feeding was provided but as it is, the whole money targeted for that purpose are in peoples pocket or used for purchase of expensive vehicles. Secondly there is no record apart from the 27% increase which some states are even yet to pay that teacher have ever experienced. But yet these governors and their agent are part of the agreement and receive much for such. Recommendations In order to address the challenges the following recommendations are provided. 1. There is the need for the MDGs to integrate provision of fund particularly for the provision of training tools, equipment and infrastructure. 2. The attitude of the administrators needs to be checked by the involvement of host communities and various trade unions in the execution of all MDGs projects through close monitoring and evaluation. 3. MDGs approach to funding should adopt the bottom to top approach, just as is done by the ETF. This will reduce the rate of corruption. 4. There is the need to re-train the technical teachers on ground, in the area of new technologies, and the integration of the new technologies, such as phone repairs, computer circuit design etc in the curriculum of technical teacher training institutions by so doing the curriculum will be functional and relevant. 5. Leaders should be honest in handling issues to do with the MDGs target, for the programme to succeed. Conclusion. The paper was of the focus that, to achieve the MDGs in Nigeria, there is the needs to have a kind of education that will enable the learner acquire skills, attitude and knowledge that will lead to job creation. And that kind of education can be provided by the properly trained technical teacher. However challenges abound for the technical teacher training and the teaching of Basic technology at the junior secondary schools. REFERENCES Adullahi, M. L. Sa’I, H. R (1998). Strategies for improving vocational and technical teacher Preparation in Nigeria. A paper presented at the second annual National conference on Improving the quality of Vocation and Technical Education in Nigeria for sustainable Development: organized by the school Vocational and Technical Education, Federal College of Education: Kastina 25th May. Adetunji, O. Victor, A (1997). Science technology and economics revitalization in the year 2000 A. D and beyond the role of teacher education in Nigeria: Proceedings of the conference of the Nigerian association of Teachers of Technology on â€Å"production approach to the teaching of concepts in technology for national development. Ali, H. (1992). Teachers’ evaluation for instructional improvement. The Nigeria Teacher Today 1 (2) .14-19. Federal Republic of Nigeria. (2004). National policy on Education 4th ed Lagos. NERC. Foel, N. A. Frit, R. L. (1998). The influences of technology on vocational teacher education, -e-Journal of vocational and technical education. Retrieved: 16/01/2009 http://scholar. lib. vt. edu/ejournals/ej-search. html. ,. Garba, E. Y. Dambe, N. (2007). Reorganizing the NCE technical programme for effective skill acquisition. Journal of issues in technical teacher education 4 (1). 119 -126. Goro,C. A. (2000). Technical teacher production and utilization in nigerian secondary education: relevance for developing skills of craftsmanship and humanistic discipline. Teacher production and turnover patterns in Nigeria; National commission for colleges of education; Kaduna. National Commission for Colleges of Education. (2002). Minimum standard for Nigeria certificate in education vocational and technical education 3rd edition Garki, Abuja,. Author. National Commission for Colleges of Education. (2006). National commission for colleges of education: Brochure. Abuja: Author. National Commission for Colleges of Education. (2007). National commission for colleges of education, Digest of statistics on colleges of education in Nigeria 2005/2004 and 2004/2005 vol. 8 Abuja: Author. Olaitan S. O. (1986). Vocational education and national manpower development constraints and strategies. Vocational education association journal 2 10-12. Olaitan,S. O. (1996). Vocational and technical education in Nigeria: Issues and analysis. Onitsha. Noble Graphic Press. Olaitan, S. O. (1986). Vocational education and national manpower development Construct and Strategies. Vocational education association journal 2, 10-14 Umar, A. J. , Suleiman, H. J. Adamu, A. M. (2009). Role of vocational and technical Education realization of the millennium development goals (MDGs) in Nigeria. A paper presented at the 2nd COEASU North-East zone annual Conference held at college of education jalingo. Dung-Gwon, J. Y. (2009). Vocational Technical Education and the millennium Development goals in Nigeria. An overview. Unpublished lead paper presented At the 7th annual Conference of the Nigeria association of vocational And Technical Educators (NAVTED), at COE Akwanga, Nassarawa State,Nigeria. Iyortyer, M. T. (2010). MDG Needs Assessment: A paper presentation of MDGs costing Workshop held at Government House Internet base station, Yola, Adamawa state 22nd -24th March. Ibrahim, A. J. (2006). Progress on MDGs in Nigeria: Education Where are we? Unpublished paper presented at the 12th Annual Nigeria Economic Summit 7th-9th June. Igbuzor, O. (2007). Nigeria and the Millennium Development Goals. Proceedings of 20th Annual Conference, Nigeria Association of teacher of technology 53-54 The National Planning Commission,(2005). Nigeria Millennium Development Goals 2005 report. Garba, E. Y Nuhu, D. (2007). Reorganizing the NCE technical programme for effective skill Acquisition. Journal of issues in technical teacher education 4 (1) 119-126 Onyidoh, H. (2010). The decline of the education system in Nigeria. Retrieved 6/07/2010. Htt://www. helium. com/knowledge/90654.

Intel Essay -- essays research papers

Introduction   Ã‚  Ã‚  Ã‚  Ã‚  This analysis of Intel Corporation is to educate the investor about the company and provide them with useful information that will enable them to make a decision as to whether they should invest in the company. Intel primarily manufactures semiconductors or integrated circuits containing silicon that are used in computers as computer chips.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  The purpose of this paper is to provide the investor with facts regarding the company profile, global presence, environmental policies, competitors, and stock performance. After review of the analysis the investor should be able to determine if Intel is a profitable investment.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  This analysis has been gathered through the use of primary and secondary resources. The primary resources used are mainly interviews with Intel CEO, Craig Barrett. Secondary resources have been the main source through articles that have been gathered using online sources and journals. Background In 1968 Bob Noyce, Gordon Moore and Andy Grove founded a new company that built semiconductor memory products, named NM Electronics Inc. Moore and Noyce had problems with the copyright of the company’s name as it already belonged to a hotel chain. Noyce, Moore and Grove then changed the name to Intel Corporation, short for Integrated Electronics. The small startup company was founded in Santa Clara, California with $500,000 and funds from investors. In 1971 they introduced the world’s first microprocessor, which revolutionized the computer industry. Moore sensed the impending growth of the semiconductor computer chip industry and predicted that the amount of transistors on a single computer chip would double every year. This fact helds true and has been coined as â€Å"Moore’s Law†. Intel's mission is to be the preeminent building block supplier to the Interne... ...lopment at a time when the semiconductor industry began to slow down. He persisted through the semiconductor industry’s slowdown and shifted focus on diversifying Intel’s market. Now as the semiconductor industry begins to surge ahead CEO Craig Barrett has been given praise for his foresight and perseverance. Barrett will be stepping down as CEO in the spring of 2005, and will sit on the board of directors with Intel founder Andy Grove. As reported by Intel, Barrett earned a salary of $610,000 and received a $1.5 million dollar bonus in 2003. Paul Otellini, Intel’s chief operating officer will be taking over the position of CEO. Otellini, is Intel’s first CEO without an engineering degree.   Ã‚  Ã‚  Ã‚  Ã‚  In 2003 Intel Foundation and Intel Corporation contributed more than $90 million to primary and secondary education, higher education, and to non-profit organizations in communities where Intel operates. CEO Craig Barrett’s point of view on the nation’s education system, â€Å"A faulty educational system that does little to teach adequate math and science skills is a major problem the high-tech economy and the nation will need to address in the coming years† (Riucciti).

Compare and contrast the ways in which Thomas Hardy Essay

Hardy presents Troy’s seduction through his use of form, structure and language in order to present the bewitching nature of her courtship with Troy. I have taken a particular scene from the novel, in order to illustrate the point presented above. This scene takes place soon after Troy, a soldier, has met with Bathsheba Everdene, a stern young woman who has inherited her uncle’s farm, is to observe Troy’s sword practices. She is certain that she will not attend but not long before their meeting, Bathsheba relents and goes to see him. She is enthralled and frightened by his practises, as he comes very close to harming her with his sword. In the closing parts of the scene Troy kisses Bathsheba, and leaves her feeling quite ashamed. Hardy’s narration in this particular scene is very much focused on Bathsheba. The reader is only able to observe the movements of Troy and his speech. As a result, the reader is able to grasp Bathsheba’s enchantment whiles watching Troy. The sword practice does, in fact, enchant Bathsheba. She believes that the sword has â€Å"passed through her body,† by some sort of â€Å"magic. † She describes the swords gleaming reflection of sunlight, as if the sword itself is â€Å"greeting† her. She is enthralled by all the different types of light that it produces. The sword takes on a wand like appeal, as if Troy is casting a spell on Bathsheba and drawing her closer towards his designs upon her. His sword show evokes fear and wonderment from her, and these feelings soon lead her to fall for Troy. A sense of enchantment is also created in the courtship between Edward Sydney and Julia Wellsey, in Bronte’s â€Å"The Foundling. † On approaching Julia’s home, Sydney hears her singing in an â€Å"angelic† and â€Å"harmonious† fashion. In her song she professes her love for Sydney, and he is driven to her feet in a bout of passion after he discovers the Julia is the singer. Both Lady Julia and Troy put on a show for their objects of love. Troy’s sword show and Julia’s singing both create a sensory appeal towards their lover. However Julia’s angelic song is far more peaceful but still as attractive to Sydney, as Troy’s dangerous but beautiful sword show is to Bathsheba. On leaving Troy, Bathsheba’s feelings are engaged even more so than before. As Troy leaves, he kisses her on the mouth and this leaves Bathsheba feeling shameful. After he has kissed her, Hardy describes how â€Å"blood† is â€Å"brought beating into her face,† and it sets her â€Å"stinging as if aflame. † His description portrays Bathsheba’s passion. The active movement of the blood; the dynamic nature of his description, injects energy and passion into Bathsheba’s manner. She is described as being aflame; a common allegory for passion. Likewise in Edith Wharton’s â€Å"The Age of Innocence,† Wharton describes a â€Å"burning flush† of blood rising up Olenska’s neck. The two women- Olenska and Bathsheba- both appear stern and self-confident in their rejection of their suitors; however, they are still susceptible to passion and desire. They possess that same physical and carnal passion men have in many works of literature. In Phillip Sydney’s â€Å"The Old Arcadia,† Sydney describes Musidorus’ love for Pamela as a physical tremor in his body and likewise in D.H Lawrence’s â€Å"Lady Chaterley’s Lover,† Mellor’s feels a burning in the back of his loins, when he is approached by lady Chaterley. Their two characters can therefore represent a change in societies’ opinion of woman that came in the late Victorian period: women also have desires and through this they are made equal to men in the novels; ideals that the suffragettes upheld very much. The physical apprehension in Bathsheba’s character is also seen prior to her meeting with Troy. She changes her mind, quickly, and seeks out Troy. When reaching the pit that Troy is found, Hardy describes the way her â€Å"eyes shone and her breath went quickly. † Her physical state heightened to a tremor and her desire to meet Troy is described as temerity, therefore, the reader receives a great deal of information concerning Bathsheba’s initial desire to see Troy. The dynamic description of her physical being creates a sense of apprehension, this could not only be discerned as desire, but it may relate to a fear of what Troy plans to undertake with her, or a need to satisfy a social expectation to meet with the needs of the promise she made with him. Her anticipation for their meeting creates tension. Similarly in Mary Shelley’s â€Å"Frankenstein,† her description of Frankenstein’s monster’s apprehension, that causes the scene in which he approaches De lacey to befriend him, to be made significant. These two scenes are very much significant in each of the two narratives. In Hardy’s â€Å"Far From The Madding Crowd,† this event marks the beginning of Bathsheba’s loss of reason, upon falling in love with Troy. In â€Å"Frankenstein† this event marks the uprising of the monster’s aggressive revenge against humanity, as De Lacey and his family shun him. On falling in love with Troy, Bathsheba is not only susceptible to her loss of reason but she is also vulnerable to scandal. Her decent into irrationality and scandal, is presented through Hardy’s use of setting. Initially Bathsheba is in an open space; a field that Hardy describes as having â€Å"radiant† â€Å"hues,† â€Å"untainted† in green. He describes the scenic view of the field as it is covered with â€Å"plump Diaphanous. † This place is reflective of the serenity that Bathsheba enjoys in her reason, and it also reflects the beauty of her innocence that has been untainted, like field has an untainted colour, by her suitor’s scandal. Similarly in Jane Austen’s â€Å"Pride and Prejudice,† Darcy’s estate reflects the new found beauty Elizabeth finds in his character. The natural beauty in Darcy’s estate relates to the untainted virtue that Darcy has possessed since childhood, as the natural beauty of the field relates to the innocence of Bathsheba. However, when she approaches Troy, she is unexpectedly descending into a scandal and irrationality. The pit is a place that represents Bathsheba’s enthrallment to Troy-there she is taken by Troy’s sword practice and left feeling desirous after he kisses her. She has also opened herself up to scandal through entering the pit. Troy has impregnated a girl, Fanny Robin, and Bathsheba is unaware of this. The pit is also a place of concealment. In this environment, Bathsheba and Troy are concealed away from the rest of the world, and Troy is free to practise his designs upon her, uninterrupted. The concealment of the setting reflects the concealment of Troy’s true cruelty. During their meeting, Bathsheba is completely unaware of the scandal that Troy is guilty of-he has abandoned his pregnant former lover. The pit is also a place where light is narrowly concealed. The darkness of the setting may reflect the darkness of Troy’s true character. In a similar way, in Hardy’s â€Å"Tess of the D’Urbivilles,† Alec’s rape of Tess is concealed in a dark and misty night. His deed like Troy’s seductive shows, is also concealed from the view of other characters, and as a result, both are cast in a sinister light, but Alec more so for is deed than Troy. In conclusion Hardy uses setting to reflect the descent that Bathsheba encounters physically and emotionally when she is to meet Troy. Hardy also describes Bathsheba’s apprehension when meeting Troy in order to cause their meeting to appear more significant to the reader than other scenes in the novel; a technique employed by Mary Shelley in â€Å"Frankenstein. † His description of her blood rushing, and the fire that she feels inside herself functions to describe her desire for Troy, and this also signals the beginning of Bathsheba’s reason being broken into.

Logic

Is communication e cattle without the logical connectives such as or, ND, implies, not, if and only if ? [200 words] 5. Why we treat mathematical truths as certain? Why in logic we me- aphasia on autologies† 2 rather than contradictions? [200 words] (Consistency) an attribute of a logical system that Is so constituted that none of the propositions deducible from the axioms contradict one another 4. [n] – a harmonious uniformity or agreement among things or parts Tautology: a statement that is necessarily true (like 2+2-4) 1 6. What is wrong with the following argument?The more you study, the more you learn. The more you learn, the more you know. The more you know, the more you forget. The more you forget, the less you know. The less you know, the less you learn. So, why study? 7. Analyze the following argument: God is All Powerful, omnipotent and omniscient. If God can do anything, can He create something that even He can't a etc? (e: A stone so heavy that He can't lift It) God can do anything that Is Possible. Even God can't do something that Is not possible to be done Can God create a stone so heavy that even He can not lift it? 8.In a harsh totalitarian country an innocent person is arrested on Sunday evening and Marilyn condemned to execution, which they are told will take place on one of the following eve mornings. To make matters worse, they are told that they will not know the day before which morning it will be. After several hours torment the prisoner fails into a peaceful sleep as they realize that such a threat cannot be carried out. They reasoned thus: The execution cannot take place on Friday morning; for if they are still alive on Thursday night then the execution must take place on Friday.But they were told that they would not know the day before which day it would be. So it cannot be Friday, and so Friday can be counted out as a possibility. But by the same reasoning it cannot be Thursday either. For if they are still alive on Wedn esday night then the execution must take place on Thursday. But they were told that they would not know the day before which day it would be. So it cannot be Thursday, and so Thursday can be counted out as a possibility. But by the same reasoning it cannot be Wednesday either†¦Ã¢â‚¬ ¦. The same reasoning covers Wednesday, Tuesday and Monday and so the prisoner can have a sound nights sleep.The prisoner is, however, greatly surprised to ND themselves facing the executioner on Wednesday (or indeed any other) morning. What went wrong with the prisoner's reasoning? Write down the steps clearly and show how paradox 3 arises in the above situation? Paradox: An apparently sound argument leading to a contradiction. Some famous 2 PHI 142: Introduction to Logic Mid Semester Exam Date: 19 February 2013 Department of Humanities and Social Sciences Indian Institute of Technology Kanata Answer all of the following questions. Write answers in a separate booklet.Max. Marks: 30 Time: 2 hours; 1 7. 30-19. 30 PM We may define faith as the firm belief in something for which there is no evidence. Where there is evidence, no one speaks of . We do not speak of faith that two and two are four or that the earth is round. We only speak of faith when we wish to substitute emotion for evidence. †¦Ã¢â‚¬ ¦ Bertrand Russell Answer whether the following statements are True or False. Justify it prefer- ably with a very short answer. 1. The following argument is valid: If computers can reason, they can ask questions. Computers can reason.Therefore, computers can ask questions . The following argument is an instance of Fallacy of accident fallacy . † Oh my lord, don't take any courses in the biology department not even as open elective, as they are really tough and terrible. I took EBBS:322 and it was a disaster. † 3. The categorical propositions, All who are non intelligent are non-college students and all who are college students are intelligent are contradictory to each other 4. I am sure that you will agree that we should not vote Mr.. Panky Saxons for the next presidential elections in this hostel.If he gets elected, we will all be deprived of mom of the privileges that we are enjoying at this moment. Anyone not agreeing with this will be fired immediately from this wing A-top. In the above argument, the arguer is said to be committing straw-man fallacy. 5. False Cause fallacy is committed when the conclusion rests on the presumption of a causal link between two phenomena, when in fact all that has been shown is a correlation. No concepts are expressive intuitions on aversion converts to All concepts are non- expressive intuitions 7.The categorical propositions, All logic students are bright people No logic students are non-bright people re contradictory to each other. 8. The following argument is invalid If Newton's theory is correct, then light should not be deflected by gravity. In this experiment, we can see that light is deflected by gravity . Therefore, Newton's theory is not correct PHI 142: Introduction to Logic Mid Semester Exam Date: 19 February 2013 2. Which of the following passages contains arguments and which are not I. E. , Non-arguments 1 . If there is one theme that will be the topic of digital business this year, it is mobile.Commerce, which tracks Web and mobile usage, published a report about what hap- need in 2012, and what to expect in 2013. It shows that the effects of a movement toward mobile are everywhere, from shopping to media to search. According to the report, â€Å"2013 could spell a very rocky economic transition,† and businesses will have to scramble to stay ahead of consumers changing behavior (anytime. Com). 2. Ordinary glass is soda lime glass and is a mixture of silicates of sodium, potassium, calcium and aluminum etc. It is brittle because its molecular structure is composed of tetrahedral crystals.These crystals do not have a good large area orderly resealing structure. 3. People are not free, although human freedom has been highly prized throughout our history. Its value is affirmed by religious doctrines. Civil and criminal Justice systems incorporate the idea that behavior is freely chosen into sentencing guidelines. Clearly it has been an important concept in many areas of human activity. 3. Identify the type of Fallacy of Weak Induction from the following arguments 1 . I cracked most of my crucial exams (board exams) in the past while wearing my green tea shirt and writing an exam with my parker pen.Therefore, green color tea hire with a parker pen is a lucky combination and brought lot of success. Hence I should not forget to take it when I go for an exam again for achieving success in the exam. 2. If once a man indulges himself in murder, very soon he comes to think little of robbing; and from robbing he comes next to drinking and Sabbath breaking, and from that to incivility and procrastination. Once begin upon this downward path, you never know whe re you are to stop. Many a man has dated his ruin from some murder or other that perhaps he thought little of at the time. 3.Famous theologian William Palely argument from design suggests that a watch and the universe are similar as both display order and complexity. If order and complexity constitute evidence of design in the case of a watch, though, then they must also constitute evidence of the product of intelligent design that the universe must be a product of intelligent design too. 4. In 1742, Christian Goldberg conjectured that every even number greater than 2 is the sum of two primes. Mathematicians have been trying to prove Schoolbag's conjecture ever since, but no one has succeeded in doing so.After two and a half entries, I think we can safely conclude that Goldberg was wrong. 4. Identify the type of Fallacies of Relevance 4 committed by the following arguments. Justify your answer with a brief explanation 1 . Social Security old age benefits ensure you can retire with d ignity. If you become injured or are unable to work, Social Security disability benefits will help keep you afloat. But, Mrs.. Sheila's arguments against cuts in Social Security are worthless. As a recipient of Social Security benefits, she would naturally be expected to argue exactly the way she does. Page 2 of 4

Abigal Adams essays

Abigal Adams essays Abigail Adams Witness To a Revolution Abigail Adams was born on November 11, 1744 at Weymouth, Massachusetts. Abigail was often referred as the wife of one president and the mother of another. Her Family was of great prestige in the colony. Her father was a Congregational minister, a leader in a society that held its clergy in high esteem. Smith was one of Weymouth's most prosperous and best-educated citizens. In the novel, she learned that it was the duty of the fortunate to help those who were less fortunate by her father. During her youth, she was small, frail child with fair skin and dark hair. Abigail was not educated but her mom wanted her to be a lady and thought education was for men. Her and her two sisters, Mary and Betsy, were vary close to each other. They enjoyed listing to people talk about French and Indian war at that time. They loved people like George Washington who were brave and young and when the governor of Virginia placed him commander of a group of militiamen. In 1761 Richard Cranch introduced John Adams to the Smiths. He thought Abby and her sister Mary were wits. Soon Abigail started to fin d something attractive to John Adams. After awhile John Adams found business in Weymouth. He and Abigail began to fall in love with each other. John started to tell Abby about his boyhood. He told her how he loved swimming and hanging out with friends like John Hancock. He told her how he wanted to be a farmer and how his father tested him if he could handle it. He said him and his father went to work on the farm. They worked all day up to their knees in the mud. Then his father asked him do you like farming John replied yes. But his father didnt like it and forced John in going to school. ...

All About Old Growth or Virgin Forests

All About Old Growth or Virgin Forests An old growth forest, late serial forest, primary forest or ancient forest is a woods of great age that exhibits unique biological features. Depending on tree species and forest type, the age can be from 150 to 500 years. Old growth forests typically contain a mixture of large live and dead trees or snags. Unharvested fallen tree logs in various states of decay litter the forest floor. Some environmentalists blame the dramatic loss of U.S. old growth forests to exploitation and disruption by Euro-Americans. It is true that old growth stands need a century or more to grow. How Will You Know You are in an Old Growth Forest? Foresters and botanists use certain criteria to determine old growth. Sufficient age and minimal disturbance is necessary to be classified as old growth. Characteristics of old-growth forest will include presence of older trees, minimal signs of human disturbance, mixed-age stands, canopy openings due to tree falls, pit-and-mound topography, downed and decaying wood, standing snags, multi-layered canopies, intact soils, a healthy fungal ecosystem, and presence of indicator species. What is a Second Growth Forest? Forests regenerated after harvests or severe disruptions like fire, storms or insects is often referred to as a second-growth forest or regeneration until a long enough period has passed that the effects of the disturbance are no longer evident. Depending on the forest, to become an old growth forest again may take anywhere from one to several centuries. Hardwood forests of the eastern United States can develop old-growth characteristics with several generations of trees existing in the same forest ecosystem, or 150-500 years. Why are Old Growth Forests Important? Old growth forests are often rich, biodiverse communities harboring wide varieties of plants and animals. These species must live under stable conditions free from severe disturbance. Some of these arboreal creatures are rare. The age of the oldest trees in an ancient forest indicates that destructive events over a long period were of moderate intensity and did not kill all the vegetation. Some suggest that old growth forests are carbon sinks that lock up carbon and help prevent global warming.

Prescriptive Approach to Business Strategy Formulation Essay

Prescriptive Approach to Business Strategy Formulation - Essay Example This essay describes main characteristics of the prescriptive approach to business strategy and compares it with the emergent approach. The present day business environment is largely characterized by the large scale fluctuations and turbulence in the business environment. This has called for an immediate need for business organizations to develop a strategic framework that seeks to generate competitive advantage. Prescriptive strategy is largely being rated by scholars and business strategists as a top down approach. Prescriptive strategies are usually framed by the top management and are largely applicable in stable business environments. These strategies are increasingly employed when customers have low bargaining power and it is easy to predict customer’s moves and motives. This strategy therefore cannot be used in times of turbulence. Since the top management is the sole decision maker in the prescriptive strategy making process hence the decision maker is segregated from the target market that makes these strategies largely ineffective in turbulent and fluctuating business environment. Prescriptive strategies normally are effective during stable conditions when the situations are largely stable and the market behavior can be easily analyzed. While prescriptive strategies may be beneficial in times of stable business environments however the emergent strategy framework with its bottom up approach and flexible nature scores well above the prescriptive approach in times of turbulence in the business markets.